Project 62 Tabletop Photo Frame How To Open

Download Article

Download Article

Taking autonomously a picture frame to call back or replace a print tin be tricky if y'all don't know what you lot're doing. It's also a unlike process depending on whether the frame is made out of woods or metal. Fortunately, once you know what to do, y'all can accept apart a pic frame in a matter of minutes.

1. i

   Flip your frame over so it'south face up-down. Yous'll be working from the back of the frame as you lot take it apart. Work on a make clean flat surface so y'all don't damage the glass on the forepart.^[1]

2. 2

   Cutting off the paper bankroll using a utility knife. If the back of your wooden frame isn't covered with paper, you lot can skip this step. Otherwise, cut along the inside edges of the frame with the utility pocketknife and and then pull the cut-out paper off the back of the frame.^[two]

   Advertisement

3. 3

   Pull out the nails or staples with pliers. Now that the newspaper bankroll is off, you should see a piece of cardboard that'south held in place by small nails or staples. You demand to pull them all out with the pliers so y'all can take the cardboard out of the frame.^[3]

   • If you're having trouble getting staples out with pliers, endeavor a staple remover.

4. four

   Lift the contents of the frame out of the frame. Take out the piece of cardboard, the print, and the drinking glass. Set up them somewhere safe so you tin reuse them later on.^[4]

Advertisement

1. 1

   Plow your metal frame over then it's upside down. You'll need to access the dorsum of the frame to take it apart. Make certain the surface you're working on is make clean and flat so the glass on the front of the frame doesn't get damaged.^[five]

2. 2

   Unscrew the wire from the back of the frame. Most metal moving-picture show frames are hung using a wire that runs between the left and right sides of the frame. If your frame doesn't have a wire, y'all can skip this stride. If it does, use a screwdriver to remove the screws that are holding the wire in place. Set the wire and screws aside.^[6]

3. 3

   Cut forth the inner edges of the frame with a utility pocketknife. At that place should be paper lining the inner edges of the frame. You'll demand to cut through the paper and then you lot can access the bound clips that are holding the frame together.^[7]

4. 4

   Utilise a flat-head screwdriver to pull out the spring clips from the inner edges. The spring clips are the clips inside the frame that concur the contents of the frame in place. To remove them, wedge the flat-head screwdriver under the ends of the clips and bend the screwdriver until they pop out. Once they're partially out of the frame, apply your easily to pull them out the residuum of the way.^[8]

   • In that location should be iv spring clips in full — ane on each side.

5. 5

   Remove the screws in the bottom corners of the frame. You demand to remove these screws so you can take apart the bottom of the frame. When you're finished, place the screws somewhere condom then you lot have them when you're set to put the frame back together.^[9]

6. vi

   Pull the bottom side of the frame out. The lesser side should easily split from the rest of the frame now that the screws in the lesser corners have been removed. If information technology's stuck, endeavour tapping on information technology a few times with the handle of the screwdriver to force it out.^[ten]

7. 7

   Slide the contents of the frame out of the open side. Set the frame backing, the print, and the glass bated. When you're ready to put the frame back together, all you need to do is slide the contents of the frame back into the open up side and spiral the lesser of the frame back on. Simply on fancier frames, exercise make sure to pinch together the two prongs on the corner 50-brackets, when reassembling. This guides them to the correct groove to align parts properly. Otherwise the external corners will be misaligned. ^[eleven]

Advertizement

Add New Question

• Question

  How do y'all open a sealed picture frame?

  

  This answer was written by ane of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  

  Support wikiHow by unlocking this staff-researched respond.

  Information technology depends on the blazon of frame. Most picture frames have tabs or locks that keep the picture show in identify. Yous may need to examine the frame carefully to detect them. If the frame has backing paper over the dorsum, y'all'll demand to carefully cut information technology away commencement.

• Question

  How do I open a moving picture frame with tabs?

  

  This reply was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  

  Support wikiHow by unlocking this staff-researched answer.

  Some motion picture frame tabs demand to exist aptitude dorsum to release the picture. Y'all may need a tool, such as a butter pocketknife or a screwdriver, to bend the tabs. If the tabs are made to turn or swivel, you merely demand to rotate them to get them out of the fashion.

• Question

  What is the brownish paper on the back of movie frames?

  

  This reply was written by ane of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Respond

Encounter more answers

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advert

Thank you for submitting a tip for review!

Things You'll Demand

• Utility knife
• Pliers

• Apartment-head screwdriver
• Utility knife

Virtually This Article

Article Summary 10

Whether your frame is fabricated of wood or metallic, you can accept information technology autonomously with a few basic tools. If your wooden frame's covered past paper, cut forth the edges with a utility knife and remove the newspaper. You should see nails or staples holding a slice of cardboard in place. Pull these out with pliers. So, you should be gratis to remove the cardboard, impress, and glass. For a metallic frame, offset you'll need to unscrew the mounting wire from the back. If there's newspaper covering the back, cut this off too. And then, use a flat-caput screwdriver to remove the spring clips from the inner edges and the screws in the lesser corners of the frame. Once you've removed those, you should be able to slide the bottom side of the frame out and remove the print and glass. For more than tips, including how to remove the lesser of your metal frame if it's stuck, read on!

Did this summary assistance you?

Thanks to all authors for creating a folio that has been read 121,146 times.

Did this article assist y'all?

Source: https://www.wikihow.com/Take-Apart-a-Picture-Frame

Share this post